xDIM Pro


xDIM Pro

xDIM Pro

Xplore’s xDIM family of Dock Interface Modules provide versatile, multi-purpose docking solutions specifically designed for use in a variety of rugged applications, including fleet and emergency vehicles, forklifts, and many other types of vehicles. The xDIM Pro uses General Purpose Input/Output (GPIO) to receive information and output signals to manage a wide range of external devices.

Key Benefits:

  • Industrial glass-filled polymer body for improved durability
  • Peripheral support with 3 USB 2.0 ports
  • Built-in cable retention
  • Allows for dry storage in wet spray down and freezer environments

Specifications:

  • Connectivity
    • 3 USB 2.0 ports – 1 side, 2 rear
    • Audio in/out port
    • Power connectors: screw-on and barrel jack
    • 1 gigabit Ethernet port
    • VGA and serial ports
    • 1 external antenna pass-thru
    • 1 GPIO: 3 input, 3 output
    • DC IN (12-24VDC)

Tests:

  • Minimum Integrity Vibration: Category 24 | Unit is not operating (Tablet with Dock and Vehicle Kit) | MIL-STD-810G, Method 514.6, Procedure I
  • Vehicle Vibration: Vehicle Vibration Testing | Unit is operating (Tablet with Dock and Vehicle Kit) | MIL-STD-810G, US Highway Truck, Method 514.6, Procedure I
  • Functional Shock: 20G operating | 40 g non-operating (peak); 11 ms, saw tooth | 6+/- shocks x 3-axis=18 shocks | 40G not operating (Tablet and Dock) | MIL-STD-810G, Method 516.6, Procedure I
  • Operating Temperature: -20°C to +60°C (Tablet): Cold boot within 15 minutes. MIL STD 810G, Method 501.5, 502.5, Procedure I and II
  • Storage Temperature: -51°C to +71°C. Unit is not operating (Tablet with Dock). MIL STD 810G, Method 501.5, 502.5 Procedure I and II
  • Thermal Shock: -51°C to +71°C within 15 min. Unit is not operating (Tablet with Dock). MIL STD 810G, Method 503.5, Procedure II- Cyclic
  • Relative Humidity: 3% to 95%; non-condensing humidity; 23°C to 60°C. 5 cycles of 48hrs. Unit is operating (Tablet with Dock). MIL-STD 810G, Method 507.5
  • Crash Shock: 75G (peak), 6ms, saw tooth, 2+/- shocks x 3-axis= 65 shocks. Unit is not operating (Tablet and Dock). MIL STD 810G, Method 516.6, Procedure V